DACNISDACNIS 68
Compressor Oil
Oils for reciprocating air compressors.

TotalEnergies carries one of the industry's broadest OEM approval portfolios — over 4,000 worldwide — spanning passenger cars, fleets and more than 400 industrial applications. 160 products and 3 documents for this sector.
A representative selection from the TotalEnergies range — the full programme runs to thousands of grades. Ask us for anything you do not see.
DACNISCompressor Oil
Oils for reciprocating air compressors.
DACNISCompressor Oil
Oils for reciprocating air compressors.
DACNISCompressor Oil
Oils for reciprocating air compressors.
DACNISCompressor Oil
Hydrocracked mineral oil for lubricated screw air compressors, with a draining interval of 4000 hours; ISO VG 32 to 68.
DACNISCompressor Oil
Synthetic (PAO) oil for rotary screw air compressors, with a draining interval of 8000 hours; ISO VG 32 to 100.
DACNISCompressor Oil
Synthetic (ester) oil for high-pressure reciprocating and rotary air compressors and turbochargers; ISO VG 46 to 100.
PRESLIATurbine Oil
Oils for turbines and turbochargers.
PRESLIATurbine Oil
Oils for turbines and turbochargers.
PRESLIATurbine Oil
Oils for turbines and turbochargers.
PRESLIATurbine Oil
Oils for turbines and turbochargers.
PRESLIATurbine Oil
Hydrocracked mineral oil for steam, gas and combined cycle turbines, with very high oxidation resistance and enhanced anti-wear and extreme pressure properties; ISO VG 32 and 46.
PRESLIATurbine Oil
Hydrocracked mineral oil for modern steam and gas turbines, combined cycle turbines and turbochargers, with very high resistance to varnish and deposit formation; ISO VG 32 and 46.
BIOPRESLIATurbine Oil
Biodegradable turbine oil based on saturated synthetic esters, for hydroelectric plants — turbines and hydraulic circuits; ISO VG 22 to 100.

Coolant / Antifreeze
Aqueous concentrate of special organic inhibitors against corrosion and cavitation, for industrial diesel and gas engines not requiring anti-freeze protection.
COOLELFCoolant / Antifreeze
Ready-to-use monoethylene glycol cooling fluid with organic corrosion inhibitors for industrial diesel engines and gas engines of all sizes; protection to -26 °C.
GLACELFCoolant / Antifreeze
Monoethylene glycol anti-freeze concentrate with organic corrosion inhibitors for industrial diesel and gas engines; -20 °C to -69 °C depending on dilution.
COOLELFCoolant / Antifreeze
Ready-to-use monoethylene glycol cooling fluid for cogeneration engines, with enhanced heat transfer capacity; protection to -7 °C.
GLACELFCoolant / Antifreeze
Monoethylene glycol anti-freeze concentrate for cogeneration engines, with enhanced heat transfer capacity; -7 °C to -15 °C depending on dilution.
COOLELFCoolant / Antifreeze
Ready-to-use monoethylene glycol coolant for the nuclear industry and cold countries, with increased anti-freeze protection to -37 °C.
COOLELFCoolant / Antifreeze
Ready-to-use monopropylene glycol cooling fluid for heat and cold transfer circuits in the agri-food and pharmaceutical industries and cogeneration plants; protection to -26 °C.
GLACELFCoolant / Antifreeze
Monopropylene glycol anti-freeze concentrate for heat and cold transfer circuits in the agri-food and pharmaceutical industries; -17 °C to -38 °C depending on dilution.
CERANGrease
Extreme-pressure, high-adhesion grease for steel cables in harsh conditions — cement plants, mines, quarries, offshore, marine.
CERANGrease
Water resistant, high temperature multipurpose EP greases.
CERANGrease
Water resistant, high temperature multipurpose EP greases.
MULTISGrease
Extreme-pressure lithium/calcium multi-purpose grease for a wide range of industrial and automotive applications; NLGI 0, -30 °C to +120 °C.
MULTISGrease
Extreme-pressure lithium/calcium multi-purpose grease for a wide range of industrial and automotive applications; NLGI 1, -30 °C to +120 °C.
MULTISGrease
Extreme-pressure lithium/calcium multi-purpose grease for a wide range of industrial and automotive applications; NLGI 2, -25 °C to +120 °C.
MULTISGrease
Multipurpose EP grease with MoS2.
BIOADHESIVEGrease
Biodegradable grease with outstanding adhesion for industrial and marine applications requiring environmentally acceptable lubricants; recommended for waterborne applications (Galle chains).
BIOMULTISGrease
Extreme-pressure biodegradable universal grease for applications requiring very soft, environmentally friendly lubricants (NLGI 0).
BIOMULTISGrease
Extreme-pressure biodegradable universal grease for applications requiring environmentally friendly lubricants, in NLGI grade 1.
BIOMULTISGrease
Extreme-pressure biodegradable multi-purpose grease for industrial and marine applications requiring environmentally acceptable lubricants (EAL).
BIO OGGrease
Extreme-pressure, high-adhesion biodegradable grease for industrial and marine applications, specially recommended for the lubrication of open gear trains.
BIOHYDRANBiodegradable Lubricant
Environmentally Acceptable Lubricant (EAL), US VGP-compliant hydraulic oil.
BIOHYDRANBiodegradable Lubricant
Environmentally Acceptable Lubricant (EAL), US VGP-compliant hydraulic oil.
BIOHYDRANBiodegradable Lubricant
Lubricant (EAL), US VGP-compliant hydraulic oil.
BIOHYDRANBiodegradable Lubricant
Environmentally Acceptable Lubricant (EAL), US VGP-compliant hydraulic oil.
CARTERBiodegradable Lubricant
Biodegradable synthetic (ester) gear oil for gearboxes at risk of accidental releases to the environment, with very good extreme pressure, anti-wear and anti-corrosion properties.
CARTERBiodegradable Lubricant
Biodegradable synthetic (ester) gear oil for gearboxes at risk of accidental releases to the environment, with very good extreme pressure, anti-wear and anti-corrosion properties.
CARTERBiodegradable Lubricant
Biodegradable synthetic (ester) gear oil for gearboxes at risk of accidental releases to the environment, with very good extreme pressure, anti-wear and anti-corrosion properties.
CARTERBiodegradable Lubricant
Biodegradable synthetic (ester) gear oil for gearboxes at risk of accidental releases to the environment, with very good extreme pressure, anti-wear and anti-corrosion properties.
CARTERBiodegradable Lubricant
Biodegradable synthetic (ester) gear oil for gearboxes at risk of accidental releases to the environment, with very good extreme pressure, anti-wear and anti-corrosion properties.
BIOHYDRANBiodegradable Lubricant
Biodegradable HEES hydraulic fluid based on saturated synthetic esters, for systems operating outdoors at temperatures in excess of +80 °C; ISO VG 32 to 68.
AZOLLAHydraulic Oil
HM anti-wear hydraulic oil for systems operating at high temperatures and pressures, bearings and various mechanisms; ISO VG 10 to 150.
AZOLLAHydraulic Oil
Ash-free HM hydraulic oil for systems particularly sensitive to the formation of deposits or operating at high temperatures and pressures; ISO VG 22 to 100.
AZOLLAHydraulic Oil
Detergent HM hydraulic oil for systems where the presence of water is unavoidable and blow-off is impossible, with enhanced extreme pressure properties; ISO VG 10 to 68.
EQUIVISHydraulic Oil
High viscosity index (HV) hydraulic oil for systems operating outdoors, with extended draining intervals; ISO VG 15 to 100.
EQUIVISHydraulic Oil
HV hydraulic oil for systems operating outdoors, with extended draining intervals and enhanced shear stability; ISO VG 32 to 68.
EQUIVISHydraulic Oil
High-efficiency HV hydraulic oil — up to 5 % energy savings — for systems operating at high temperatures and pressures or outdoors; ISO VG 32, 46 and 68.
EQUIVISHydraulic Oil
HV hydraulic oil with a viscosity index above 250 for systems operating at temperatures down to -30 °C; ISO VG 32 and 46.
EQUIVISHydraulic Oil
HV hydraulic oil with a viscosity index of 350 for systems operating at temperatures down to -40 °C; ISO VG 15 to 32.
AZOLLAIndustrial Cleaner
Synthetic detergent for cleaning oil circuits, applied at 5 % of the oil in the circuit to be cleaned.
CLEANERIndustrial Cleaner
Detergent additive for cleaning hydraulic systems, gear trains, paper machines and heat transfer systems; recommended for the removal of varnish deposits.
FINASOLIndustrial Cleaner
Multi-purpose emulsifiable grease solvent that fully emulsifies oil fouling and separates insoluble components.
FINASOLIndustrial Cleaner
100 % plant-based, VOC-free degreasing agent for cleaning all engine types, removing fuels, resins, tar and bitumen, and cleaning floors; odorless, biodegradable and non-toxic.
LubricleanIndustrial Cleaner
Solvent-based, chlorine-free cleaning agent for open gear trains, chains and cables, even during service; evaporates slowly and leaves a lubricating film with extreme pressure properties.
CARTERIndustrial Gear Oil
Mineral gear oil for industrial gear trains and bearings subjected to heavy loads and high temperatures; ISO VG 68 to 1000.
CARTERIndustrial Gear Oil
Semi-synthetic oil for slow gears, in particular kiln girth gears and crusher backing, with high load capacity under extreme pressure.
CARTERIndustrial Gear Oil
Semi-synthetic oil for slow gears, in particular kiln girth gears and crusher backing, with high load capacity under extreme pressure.
CARTERIndustrial Gear Oil
Semi-synthetic oil for slow gears, in particular kiln girth gears and crusher backing, with high load capacity under extreme pressure.
CARTERIndustrial Gear Oil
Mineral gear oil for gear trains subjected to heavy loads, high temperatures and harsh environments, with excellent protection against micropitting; ISO VG 150 to 680.
CARTERIndustrial Gear Oil
Next-generation high-performance mineral oil for ultra-heavy duty gear trains; ISO VG 220 and 320.
KASSILLAIndustrial Gear Oil
Mineral gear oil containing graphite and molybdenum disulfide, for industrial gear trains under very high load and repeated shocks — cement plants, iron and steel, mining, crushing; ISO VG 150 to 1000.
CARTERIndustrial Gear Oil
Synthetic (PAO) gear oil for gearboxes subjected to very high loads, high temperatures and harsh environments; usable outdoors thanks to a very low pour point; ISO VG 150 to 1000.
CARTERIndustrial Gear Oil
Synthetic gear oil (new hydrocarbon technology) for energy efficiency in gearboxes subjected to very high loads, high temperatures and harsh environments; ISO VG 150 to 680.
CARTERIndustrial Gear Oil
Synthetic (PAG) oil for worm and wheel gears under the most severe operating conditions — heavy load, shocks, extreme temperatures, corrosive atmosphere; ISO VG 150 to 680.
CARTERIndustrial Gear Oil
High-performance synthetic (PAG) lubricant for gearboxes with parallel, planet and worm and wheel gears; ISO VG 100 to 1000.
EstarChain Lubricant
Synthetic chain oil for continuous greasing systems, roller chains, conveyors and cams operating in kilns or ovens, at temperatures up to +240 °C.
EstarChain Lubricant
Synthetic chain oil for mechanisms operating at up to 280 °C — kiln chains and conveyors, continuous panel presses, IS glass machines — with very low volatility.
EstarChain Lubricant
Premium full synthetic ester chain oil with a low evaporation rate at temperatures up to 290 °C, for dryer and curing-oven chains; viscosities 125 and 250.
ISOVOLTINETransformer Oil
Non-inhibited naphthenic mineral insulating oil for transformers, circuit breakers and other high voltage equipment (IEC 60296).
ISOVOLTINETransformer Oil
Inhibited naphthenic mineral insulating oil for transformers, circuit breakers and other high voltage equipment (IEC 60296).
ISOVOLTINETransformer Oil
Biodegradable synthetic ester insulating oil for transformers, strongly recommended for reducing fire risks in mines and integrated transformers (IEC 61099).
ISOVOLTINETransformer Oil
Readily biodegradable vegetable oil insulating fluid for transformers, strongly recommended for reducing fire risks (IEC 62770).
GrafologOpen Gear Lubricant
Aluminum complex open-gear grease with black solid additives, for spray lubrication at cold temperature.
GrafologOpen Gear Lubricant
Aluminum complex open-gear grease with black solid additives, NLGI 0-1, applied by spray.
Gear FluidOpen Gear Lubricant
High viscosity semi-synthetic oil for the priming operation on open gears — evaluating the drive's load pattern.
Gear FluidOpen Gear Lubricant
Semi synthetic thick fluid Solvanted semi synthetic thick fluid
Gear FluidOpen Gear Lubricant
Gear Fluid is a range of high viscosity oils for the lubrication of heavy duty open gears used in the industries : Cement, ore, steel, coal lines in the ther…
Gear FluidOpen Gear Lubricant
Semi synthetic thick fluid Solvanted semi synthetic thick fluid Semi synthetic thick fluid Solvanted semi synthetic thick fluid
Gear FluidOpen Gear Lubricant
Gear Fluid is a range of high viscosity oils for the lubrication of heavy duty open gears used in the industries : Cement, ore, steel, coal lines in the ther…
Gear FluidOpen Gear Lubricant
Semi synthetic thick fluid Solvanted semi synthetic thick fluid Semi synthetic thick fluid Solvanted semi synthetic thick fluid
Gear FluidOpen Gear Lubricant
Solvanted semi synthetic thick fluid Semi synthetic thick fluid Solvanted semi synthetic thick fluid
Gear FluidOpen Gear Lubricant
Running in semi synthetic thick fluid Semi synthetic thick fluid Solvanted semi synthetic thick fluid Semi synthetic thick fluid Solvanted semi synthetic thi…
GearlogOpen Gear Lubricant
Synthetic thick fluid with white solid lubricant Solvanted synthetic thick fluid with white solid lubricant
GearlogOpen Gear Lubricant
Solvanted synthetic thick fluid with white solid lubricant